[ Back To Main ]
6/4/2007

Kitchen Cabinets

Kitchen Cabinets
by Scott Phillips, American Woodshop

Download This Plan Now »

Acrobat Reader is required to view this PDF document. Download Acrobat here.

Plywood sides and backs are trimmed out with solid wood face frames and raised panel doors to make this a typical kitchen cabinet. A nailing cleat is used where the screws are counter sunk into the wood – then drill into studs to carry the weight of a loaded cabinet. This project is also a perfect wall-mounted tool cabinet. Always allow at least 18 inches of space between the bottom edge of a hanging cabinet and the top of the counter top.

© 2002, Sylvan Tool Works, Inc.; Home of The American Woodshop®